Reverse Osmosis Water Process Explained Step by Step

Short answer: The reverse osmosis (RO) water process pushes water under pressure through a semi-permeable membrane with pores of about 0.0001 micron. Clean water molecules pass through, while dissolved salts, arsenic, lead, bacteria and viruses are held back and flushed to the drain. In a home RO water filter, the water first passes through sediment and carbon pre-filters, then the RO membrane, then a post-carbon filter, and is stored in a pressurised tank until you open the faucet. Texcel International Ltd. in Dhaka supplies RO systems and every part of the RO process. Call or WhatsApp 01915-514116.

এই গাইডটি বাংলায় পড়ুন: রিভার্স অসমোসিস (RO) প্রক্রিয়া ধাপে ধাপে

What is reverse osmosis?

Osmosis is a natural process. When two liquids with different salt levels are separated by a thin membrane, water moves from the less salty side to the saltier side until both are balanced. Plant roots take up water this way.

Reverse osmosis does the opposite. A pump or mains pressure pushes water from the dirty, salty side through the membrane to the clean side. The membrane lets water molecules through but blocks almost everything dissolved in the water. That is why RO can remove contaminants that boiling and simple filters cannot, such as arsenic, salt and fluoride.

The RO water process step by step

A typical 5-stage home RO water filter, such as the Deng Yuan TW-12100, treats water in this order:

Deng Yuan TW-12100 5-stage RO water filter showing the PP, OCB-934, CTO-10, RO membrane and T/33 stages
The 5 stages of the Deng Yuan TW-12100 RO water filter

Step 1: Sediment filtration

Water enters a 5 micron polypropylene (PP) sediment filter. It traps sand, rust, silt and dirt from pipes and tanks. This protects every stage that follows from clogging.

Step 2: Granular activated carbon

A granular carbon cartridge, for example the OCB-934, absorbs chlorine, bad smell, colour and many organic chemicals. Removing chlorine here is important because chlorine damages the RO membrane.

Step 3: Carbon block

A compressed carbon block, such as the CTO-10, catches finer particles and the chlorine and chemicals that passed stage 2. After this stage the water is clean enough to send to the membrane.

Deng Yuan UDF granular activated carbon filter cartridge used as an RO pre-filter

Step 4: The RO membrane

This is the heart of the reverse osmosis water process. The pressurised water flows across a spiral-wound RO membrane. Pure water passes through the membrane into the “permeate” line. Everything the membrane rejects, including dissolved salts, heavy metals such as arsenic and lead, nitrates, fluoride, bacteria and viruses, stays in the “concentrate” stream and is washed to the drain. Home membranes are rated by daily output: 50, 75 or 100 GPD (gallons per day).

Step 5: Post-carbon polishing

Water from the tank passes through a final T/33 inline carbon filter on its way to the faucet. It removes any taste or smell the water may pick up in the tank, so every glass tastes fresh.

Optional stages: mineral, UV and alkaline

Some systems add a sixth stage. The Deng Yuan 281C-BLUE adds a mineral stone filter that returns a little calcium and magnesium for taste. Others add a UV sterilizer after the tank as an extra barrier against germs.

Deng Yuan 281C-BLUE under-sink RO water system with mineral stone filter stage

The parts that make the RO process work

  • Booster pump: raises low tap pressure so the membrane can work at full output. Most homes in Bangladesh need one.
  • Flow restrictor: sits on the drain line and holds back pressure on the membrane, so it keeps producing pure water instead of letting everything run to waste.
  • Auto shut-off or 4-way valve and pressure switch: stop the pump and the water flow when the tank is full.
  • Solenoid valve: closes the inlet when the system is off, preventing waste.
  • Pressure tank: stores purified water so you get a good flow at the faucet even though the membrane produces water slowly.
  • RO tubing and quick fittings: connect each stage.

What the RO water process removes

ContaminantRemoved by
Sand, rust, mudSediment filter
Chlorine, smell, colourCarbon filters
Arsenic, lead and other heavy metalsRO membrane
Salt and dissolved solids (TDS)RO membrane
Fluoride and nitratesRO membrane
Bacteria and virusesRO membrane (plus UV, if fitted)

Because RO handles arsenic, iron, salt and germs together, it suits the main water problems in Bangladesh: tube-well water, coastal water and city supply that is polluted in old pipes. Read more in our guide to safe drinking water in Bangladesh.

Why an RO system sends water to the drain

The membrane does not hold contaminants like a sponge. It needs a constant flow across its surface to wash away what it rejects, otherwise it would clog in days. This concentrate water goes to the drain. A typical home system sends two to three litres to the drain for every litre of pure water, depending on water pressure, temperature and TDS. A booster pump and a correctly sized flow restrictor keep this ratio efficient. Many families reuse the drain water for mopping, washing or plants.

Keeping the RO process working

  • Change sediment and carbon pre-filters every 6 to 12 months. Overdue carbon lets chlorine reach and damage the membrane.
  • Replace the RO membrane every 2 to 3 years, or sooner if the TDS of the purified water rises.
  • Check the TDS of tap water and purified water with a meter from our test kit range. A big drop in TDS means the membrane is working.
  • Use genuine filter cartridges of the right size (10 or 20 inch) and a membrane with the same GPD rating as your pump.

Home, commercial and industrial RO

The reverse osmosis water process is the same at every scale; only the size changes. Home systems such as the TW-1250 make 50 to 100 GPD. Commercial RO systems such as the TW-200 to TW-500 series serve offices, restaurants and schools. Industrial RO systems add sand and carbon media filtration, stainless steel housings and high-pressure pumps for factories and bottled water plants. Not sure which you need? See our water filter buying guide.

Comparing models? See our list of the best RO water filters in Bangladesh, with 13 Deng Yuan and Ko Jine models compared for homes, offices and dealers.

Frequently asked questions

How does reverse osmosis work in simple words?

Pressure pushes water through a very fine membrane. Water molecules pass through, while salts, metals and germs are left behind and flushed away. The clean water is stored in a tank and polished by a final carbon filter.

How many stages does an RO water filter have?

Most home RO water filters have 5 stages: sediment, granular carbon, carbon block, RO membrane and post-carbon. Some add a sixth mineral or UV stage.

Does the RO process remove arsenic?

Yes. The RO membrane removes most dissolved arsenic along with other heavy metals. Keep the pre-filters and membrane changed on time so it keeps working.

Does RO remove minerals from water?

Yes, RO removes most dissolved minerals along with contaminants. RO water is safe to drink, and you can choose a model with a mineral stage, such as the 281C-BLUE, if you prefer the taste.

Why does my RO filter need a booster pump?

The membrane needs steady pressure to push water through. Tap pressure in most Bangladeshi homes is too low, so a booster pump matched to the membrane’s GPD rating keeps output high and waste low.

How long does an RO membrane last?

Usually 2 to 3 years, depending on water quality and how well the pre-filters are maintained. Rising TDS in the purified water is the sign it needs replacing.

Get RO systems and parts

Texcel International Ltd., the exclusive Bangladesh agent of Deng Yuan, supplies complete RO systems and every part of the RO process, including Ko Jine booster pumps and membranes, to homes, businesses and dealers. Dealers can see our wholesale RO parts page. Call or WhatsApp 01915-514116.

Scroll to Top